home
service
contact
feedback
HOME ABOUT US PRODUCT FEEDBACK CONTACT US E-MAIL

 
　
  
Product List
Masonry ladder & truss mesh
Metal wire stakes
Brick expanded mesh
Marine Reinforcement Mesh
Welded wire mesh
Crimped wire mesh
Wire fence
Stainless steel mesh
Other wire products
  Masonry ladder & truss mesh  
     
  Masonry horizontal joint  reinforcement mesh include ladder-type and truss type. Ladder type reinforcements are designed to be embedded in the horizontal mortar joints of masonry walls. It consists of two parallel side rods with cross rods welded at 16” (400 mm) O. C., thus forming a ladder configuration. Overall measurement (side-to-side rod) is approximately 2” (50 mm) less than the nominal wall thickness.truss type reinforcement designed to be embedded  masonry wall. It consists of 2 side-rods welded to a continuous diagonal formed cross-rod forming  a truss design with alter nating welds not exceeding 8” (200 mm) O. C.  overall. For use in single-wythe walls.  
     
 
Standard Length
Width
Finishes
10’(3.05m)
2”(50mm)
Uncoated
Electro Galvanized
Hot Dipped Galvanized After Fabrication
Stainless Steel 
4”(100mm)
6”(150mm)
8”(200mm)
10”(250mm)
 

 

 All products conform to:

ASTM A641 - (Electro  galvanized )
ASTM A153 Class B2 - (Hot dipped after fabrication)
ASTM A 82 - (Cold drawn steel wire)
Tensile Strength:80,000 PSI;Yield Point:70,000 PSI minimum;Reduction of Area:30 %.
ASTM A951-96 - (Masonry wall reinforcing)
ASTM 580 Type 304 - (Stainless steel)

  
 
 
  HOME | ABOUT US | PRODUCT | FEEDBACK | E-MAIL |
Address:500meter,South Zhengxuan Village,Anping County,Hengshui City,Hebei Province,China.
Tel:0086-318-7526419 Fax:0086-318-7526419 053600
http://www.metalreinforcingmesh.com
E-mail:sales@metalreinforcingmesh.com